how to get geocaching waypoins onto your garmin gps?
Garmin
mileyhappycyrus asked:
I have bought a garmin etrex legend cx mainly for geocaching, but I cant get the waypoints onto my gps I have the gps pluged into the computer and it says no gps found. does anyone have anyideals on what iam doing wrong? or how to fix this problem?
Darryl
I have bought a garmin etrex legend cx mainly for geocaching, but I cant get the waypoints onto my gps I have the gps pluged into the computer and it says no gps found. does anyone have anyideals on what iam doing wrong? or how to fix this problem?
Darryl
January 20th, 2009 at 11:25 pm
If I remember correctly, the Legend CX uses a USB connection. If it is properly connected, your computer will let you know. Without knowing specifics, here’s what I’d recommend:
Check to see if your USB port is working with another peripheral.
Be sure the cable is properly plugged in, both to the computer and to the GPSr.
Make sure the GPSr is on.
Try another connecting cable if possible. My GPS Map 76 CSX uses the same cable as my digital camera.
If these don’t work, you might have either a software problem (which I would think odd if other peripherals work) or a hardware problem, which would require technical support from Garmin.
Anyway, should you be able to read the GPSr’s presence, then downloading waypoints shouldn’t be a problem. Either your programme will have the drivers for that or a simple add-on needs to be installed.
Hope that helps.
January 21st, 2009 at 4:29 pm
The most common problem when this happens is not having the correct driver installed. You can download the driver off of the ‘Trip & Waypoints Manager’ CD that your device should have come with, or you can get it for free directly from Garmin at.
Start with this, if it doesn’t work then I’d suggest the tips from the Mad Scientist above.
January 22nd, 2009 at 7:21 am
You might have to go to Garmin’s site and download a Communicator Plug-In.